Morning Session
| 08:30 - 09:00
| R. Neugebauer: Comparison of Material Behavior and Economic Effects of Cold and High Temperature Forming Technologies Applied to High-strength Steels
|
09:05 - 09:35
| M. Pfestorf: Manufacturing of High Strength Steel and Aluminum for a Mixed Matrial Body in White
|
09:35 - 10:00
| Coffee Break
|
10:00 - 12:05
| Warm Forming
| Intelligent Manufacturing 2
| Incremental Forming 4
|
10:00 - 10:25
| P. Hein: A Global Approach of the Finite Element Simulation of Hot Stamping
| D. Cattrysse, P. Collin, J. R. Duflou, T. H. M. Nguyen, D. Van Oudheusden: The Integration of CAPP and Production Planning for Bent Sheet Metal Parts
| C. Giardini, E. Ceretti, A. Attanasio: Further Experimental Investigations and FEM Model Development in Sheet Incremental Forming
|
10:25 - 10:50
| M. Redecker, K. Roll, S. Häußinger: Magnesium Sheet Metal Forming Considering its Specific Yield Behavior
| S. Chatti, U. Dirksen, M. Schikorra, M. Kleiner: System for Design and Computation of Lightweight Structures Made of Bent Profiles
| M. Bambach, G. Hirt, J. Ames: Quantitative Validation of FEM Simulations for Incremental Sheet Forming Using Optical Deformation Measurement
|
10:50 - 11:15
| J. Hecht, S. Pinto, M. Geiger: Determination of Mechanical Properties for the Hydroforming of Magnesium Sheets at Elevated Temperature
| T. H. M. Nguyen, J. R. Duflou, J.-P. Kruth: A Framework Design for Automatic Tool Selection in an Integrated CAPP for Sheet Metal Bending
| H. Hoffmann, R. Hautmann, R. Petry: Studies for the Development of a Simulation Basis for Numerically Controlled Driving of Sheet Metal
|
11:15 - 11:40
| D. Lorenz, K. Roll: Modelling and Analysis of Integrated Hotforming and Quenching Processes
| H. Bley, C. Zenner, M. Bossmann: Intelligent Manufacturing by Enhanced Product Models
| S. He, A. Van Bael, P. Van Houtte, A. Szekeres, J. R. Duflou, C. Henrard, A. M. Habraken: Finite Element Modeling of Incremental Forming of Aluminium Sheets
|
11:40 - 12:05
| M. Geiger, M. Merklein, C. Hoff: Basic investigations on the hot stamping steel 22MnB5
| M. Prechtl, A. Otto, M. Geiger: Rapid Tooling by Laminated Object Manufacturing of Metal Foil
| C. Henrard, A. M. Habraken, A. Szekeres, R. J. Duflou, S. He, A. Van Bael, P. Van Houtte: Comparison of FEM Simulations for the Incremental Forming Process
|
12:05-13:20 LUNCH
|
Afternoon Session
| 13:20 - 15:00
| Bending 2
| Cutting
| Material 2
|
13:20 - 13:45
| R. Bahloul, P. Dal Santo, A. Mkaddem, A. Potiron: Optimisation of springback predicted by experimental and numerical approach by using response surface methodology
| F. Sekine: Effective Stripper-Holding on High Speed Precision Blanking of Electronic Machine Parts
| B. Spellenberg, J. Zettner, T. Hierl, M. Haller, T. Lenzi: Thermal Imaging Analysis of Stimulated Heat Diffuison in Sheet Metal for Non-Destructive Metrology and Testing
|
13:45 - 14:10
| M. Pitz, M. Merklein: FE Simulation of Laser Assisted Bending
| J. De Keuster, J. R. Duflou, J.-P. Kruth: Methods for monitoring of laser cutting by means of acoustic and photodiode sensors
| K. Lamprecht, M. Geiger: Experimental and Numerical Investigation of the Formability of Laser Welded Patchwork Blanks
|
14:10 - 14:35
| X. Duan, M. Bruhis, M. Jain, D. S. Wilkinson: Experimental And Numerical Study Of Intense Shear Banding For Al-Alloys Under Uniaxial Tensione
| R. Neugebauer, V. Kräusel, H. Bräunlich: Advanced Cutting Technology in Process Chains for High Strength Steels
| T. Pepelnjak, A. Petek, K. Kuzman: Analysis of Forming Limit Diagram in Digital Environment
|
14:35 - 15:00
|
| M. Masur, F. Liébana, U. Stute: An Automatic Cost Calculation System for 3-D Laser Cutting Based on Characteristic Numbers
| M.-C. Tsai, Y. A. Chen, C. F. Wu, F. K. Chen: Size-Effects in Micro-Metal Sheet Forming of Unalloyed Copper and Brass
|
15:10 - 15:25
| Closing Remarks
|
15:00
| End
|