| Morning Session
| 08:30 - 09:00
| A. H. Van Den Boogaard: Do advanced material models contribute to accuracy in industrial sheet forming simulations?
|
| 09:05 - 09:35
| F. Vollertsen: Developments and Trends in Laser Welding of Sheet Metal
|
| 09:40 - 10:10
| P. Groche: Tribology in Sheet Metal Forming with Regard to Challenges in Lightweight Construction
|
| 10:10 - 10:30
| Coffee Break
|
| 10:30 - 12:35
| Joining 3
| Surface
| Incremental Forming 2
|
| 10:30 - 10:55
| D. Tikhomirov, B.Rietman, K. Kose, M. Makkink: Computing Welding Distortion: Comparison of Different Industrially Applicable Methods
| J. Valentin, M. A. Weber, R. Brodmann, A. Sharp:3D-Characterization of sheet metal and roller surfaces by means of confocal microscopy
| J. R. Duflou, A. Szekeres, P. Vanherck: Force Measurements for Single Point Incremental Forming: an Experimental Study
|
| 10:55 - 11:20
| R. Neugebauer, R. Mauermann, S. Dietrich: Chances and Challenges in Joining by Forming with a Flat Counter Tool
| C. M. Wiechern, W. Rasp: Measuring and Quantifying the Surface-Roughness Anisotropy of Modelled and Industrially Produced Surfaces
| J. Jeswiet, J. R. Duflou, A. Szekeres: Forces in Single Point and Two point Incremental Forming
|
| 11:20 - 11:45
| M. F. Zaeh, L. Papadakis, S. Roeren, T. Hornfeck: Use of Shell Elements for the FEM-Simulation of the Welding Process of Sheet Metal Parts
| B. Denkena, F. Berg, W. Acker: Surface Inspection System for Large Sheet Metal Parts
| L. Lamminen: Incremental Sheet Forming with an Industrial Robot – Forming Limits and Their Effect on Component Design
|
| 11:45 - 12:10
| C. Thomy, M. Schilf, T. Seefeld, G. Sepold, F. Vollertsen: Distortion Minimization in Remote Welding of Steel
| M. Tolazzi, M. Meiler, M. Merklein: Tribological Envestigations on Coated Steel Sheets using the Dry Film Lubricant Drylube E1
| H. Meier, O. Dewald, J. Zhang: A New Robot-based Sheet Metal Forming Process
|
| 12:10 - 12:35
| J. Wilden, J. P. Bergmann: Mechanised Plasma-Powder-Arc-Welding (PPAW) of Aluminum Sheets
| M. Meiler, H. Jaschke: Lubrication of Aluminium Sheet Metal within the Automotive Industry
| J. M. Allwood, N. E. Houghton, K. P. Jackson: The Design of an Incremental Sheet Forming Machine
|
| 12:35-14:05 LUNCH
|
| Afternoon Session
| 14:05 - 15:45
| Friction Stir Welding
| Simulation
| Material 1
|
| 14:05 - 14:30
| S. Beccari, L. D’Acquisto, L. Fratini, C. Salamone: Thermal Characterization Of Friction Stir Welded Butt Joints
| X. Liu, B. Daniels, B. Shirvani: The Significance of Experiment in the Finite Element Analysis of a Pulley Forming Process
| L. Mosse, W. Cantwell, M. J. Cardew-Hall, P. Compston, S. Kalyanasundaram: A Study f the Effect of Process Variables on the Stamp forming of Rectangular Cups using Fibre-Metal Laminate Systems
|
| 14.30 - 14:55
| A. Barcellona, G. Buffa, D. Contorno, L. Fratini, D. Palmeri: Microstructural Changes Determining Joint Strength in Friction Stir Welding of Aluminium Alloys
| A. Behrens, J. Ellert: Buckling Texturing Technology for Increasing Stability of thin Sheet Metal Structures - Simulation and Application
| M. Geiger, G. vd Heyd, M. Merklein, W. Hußnätter: Novel Concept of Experimental Setup for Characterisation of Plastic Yielding of Sheet Metal at Elevated Temperatures
|
| 14:55 - 15:20
| A. Giera, M. Merklein, M. Geiger: Statistical Investigations on Friction Stir Welded Aluminum Tailored Blanks for a Robust Process WindowM. Thome, G. Hirt, B. Rattay: Metal Flow and Die Filling in Coining of Micro Structures with and without Flash
| F.-W. Bach, M. Rodman, A. Rossberg: High Quality Magnesium Sheets for Automotive Applications
|
| 15:20 - 15:45
| S. Dörfler, A. Otto: Friction stir welding of light weight sandwich materials
| C. Karch, K. Roll: Transient Simulation of Electromagnetic Forming of Aluminium Tubes
| R. P. Garrett, J. Lin, T. A. Dean: Solution Heat Treatment and Cold Die Quenching in Forming AA 6xxx Sheet Components: Feasibility Study
|
| 15:45 - 16:15
| Coffee Break
|
| 16:15 - 17:30
| Bending 1
| Hydroforming 2
| Incremental Forming 3
|
| 16:15 - 16:40
| B. Kanber, O. Y. Bozkurt: Finite Element Analysis of Elastoplastic Plate Bending Problems using Transition Plate Elements
| R. Krux, W. Homberg, M. Kalveram, M. Trompeter, M. Kleiner, K. Weinert: Die Surface Structures and Hydrostatic Pressure System for Controlling the Material Flow in High-Pressure Sheet Metal Forming
| G. Ambrogio, L. Filice, F. Gagliardi, F. Micari: Sheet thinning prediction in Single Point Incremental Forming
|
| 16:40 - 17:05
| M. Schikorra, R. Govindarajan, A. Brosius, M. Kleiner: Springback Analysis of Sheet Metals Regarding Material Hardening
| O. Kreis, M. Celeghini, M. Merklein: Integrated manufacturing by hydroforming, laser welding and cutting
| J. Jeswiet, J. R. Duflou, A, Szekeres, P. Lefebvre: Custom Manufacture of a Solar Cooker - a case study
|
| 17:05 - 17:30
| N. Ridane, D. Jaksic, M. Kleiner, B. Heller: Enhanced Semi-Analytical Process Simulation of Air Bending
| H. Meier, H. Ermert, P. Knoll, O. Keitmann-Curdes: 3D Ultrasonic Imaging for Sheet Metal Hydroforming
| L. W. Meyer, C. Gahlert, F. Hahn: Influence of an Incrementals Deformation on Material Behaviour and Forming Limit of Aluminium Al99,5 and QT-steel 42CrMo4
|
| Evening
| 19:00
| Conference Dinner
|