Morning Session
| 08:30 - 09:00
| Conference Opening by the Rector of the Universit, Prof. Grüske, and the Conference Chairman, Prof. Geiger
|
09:00 - 09:30
| T. Altan: TUBE AND SHEET HYDROFORMING - Advances in Material Modeling, Tooling and Process Simulation
|
09:35 - 10:05
| R. Kopp: Flexibly Rolled Sheet Metal and its use in Sheet Metal Forming
|
10:10 - 10:40
| H. J. Haepp: FE Simulation of Sheet Metal Forming - State of the Art in Automotive Industry
|
10:40 - 11:00
| Coffee Break
|
11:00 - 11:30
| K. Galanulis: Optical Measuring Technologies in Sheet Metal Processing
|
11:35 - 12:05
| J. Jeswiet: Asymmetric Incremental Sheet Forming
|
12:05-13:20 LUNCH
|
Afternoon Session
| 13:20 - 15:25
| Joining 1
| Intelligent Manufacturing 1
| Deep Drawing
|
13:20 - 13:45
| J. Wilden, J. P. Bergmann, M. Dolles, S. Reich: Use of Zinc-Alloys for Low Temperature Soldering of Zinc Coated Steels
| M. Tisza, Z. Lukács, M. Tisza jr.: Rapid Parametric Process Design using FEM Analysis
| M. Tolazzi, M. Merklein: Determination of Friction Coefficients for the FE-Analysis of the Sheet Forming of Tailored Welded Blanks
|
13:45 - 14:10
| F. Klocke, A. Castell-Codesal, D. Donst: Process characteristics of laser brazing aluminium alloys
| S. Kumar, R. Singh: Trends and Developments in Intelligent Computer Aided Design of Progressive Dies
| B.-A. Behrens, J.-W. Yun, M. Milch:Closed-Loop-Control of the Material Flow in the Deep Drawing Process
|
14:10 - 14:35
| F.-W. Bach, A. Beniyash, K. Lau, R. Versemann: Joining of Steel-Aluminium Hybrid Structures with Electron Beam on Atmosphere
| R. Lustig, R. Hochmuth, H. Meerkamm: Tolerance Analysis of Sheet Metal Assemblies with Focus on Non-Rigid Geometry
| B. Barisic, T. Pepelnjak, K. Kuzman: Numerical-Stochastic Modeling and Simulation of Deep Drawing Tinplate Rings
|
14:35 - 15:00
| U. Dilthey, A. Gumenyuk, H. Masny: Non-Vacuum Electron Beam Welding
| A. Albers, H. Weiler, D. Emmrich, B. Lauber: A new Approach for Optimization of Sheet Metal Components
| C.-W. Tai, H.-C. Tsai, S.-C. Tsai: The Development of Cold Forging Progressive Die Technology for the Case of Slim Type Spindle Motor
|
15:00 - 15:25
| L. Han, K. W. Young, R. Hewitt: The Effect of Pre-Straining on the Mechanical Behaviour of Self-Piercing Riveted Aluinium Alloy Sheets
| H. Hagenah, T. Wurm: Problem specific design of actuators for micro adjustment
| M. Kerausch, M. Merklein, D. Staud: Finite Element Analysis for Deep Drawing of Tailored Heat Treated Blanks
|
15:25 - 15:45
| Coffee Break
|
15:45 - 17:25
| Joining 2
| Hydroforming 1
| Incremental Forming 1
|
15:45 - 16:10
| H. Laukant, C. Wallmann, M. Korte, U. Glatzel: Flux-Less Joining Technique of Aluminium with Zinc-Coated Steel Sheets by a Dual-Spot-Laser Beam
| E. Ceretti, C. Giardini, C. Contri, P. Bortot: Hydromechanical Deep Drawing Simulations: Model Development and Process Parameters Investigation
| J. Jeswiet, D. Young, M. Ham: Non-traditional Forming Limit Diagrams for Incremental Forming
|
16:10 - 16:35
| C. Thomy, T. Seefeld, F. Vollertsen: High-Power Fibre Lasers - Apllication Potentials for Welding of Steel and Aluminium Sheet Material
| H. K. Tönshoff, J. Bunte, O. Meier, L. Engelbrecht: Deformation Behaviour of Sheet Metals in Laser-Assisted Hydroforming Processes
| R. Göbel, M. Kleiner, N. Henkenjohann: New Approach for Process Planning and Optimisation in Sheet Metal Spinning
|
16:35 - 17:00
| C. Thomy, F. Vollertsen: Influence of Magnetic Fields on Dilution during Laser Welding of Aluminium
| M. Geiger, P. Dal Bó, J. Hecht: Improvement of Formability in Tube Hydroforming by Reduction of Friction wiht a High Viscous Fluid Flow
| J. R. Duflou, B. Callebaut, J.-P. Kruth: Laserforming of 3D Features
|
17:00 - 17:25
| A. Blankl, M. Geiger: Improvement of Seam Quality in Laser Beam Welding of Contaminated, Zinc Coated Sheets
| P. Groche, C. Metz: Active Material Flow Control During High-Pressure Sheet Metal Forming
| H. Schulze Niehoff, F. Vollertsen: Non-thermal Laser Stretch-Forming
|
Evening
| 18:00
| Technical Tour
|