Details for Tuesday, March 17th 2015
Morning Session | H8 | H9 | H10 | |
09:00 - 09:30 | Meinhardt, J.: Stamping Plant 4.0 – Basics for the Application of Data Mining Methods in Manufacturing Car Body Parts | |||
09:30 - 09:40 | Change to Sessions | |||
09:40 - 10:55 | Materials Testing | Forming | Sheet-Bulk Metal Forming | |
09:40 - 10:05 | Hama, T.: Effect Of Pre-Compressive Strain On Work-Hardening Behavior Upon Two-Step Loading In A Magnesium Alloy Sheet | Lazarescu, L.: Evaluation of drawing force and thickness distribution in the deep-drawing process with variable blank-holding | Landkammer, P.: Experimental Verification Of A Benchmark Forming Simulation | |
10:05 - 10:30 | Lian, J. H.: Cold formability of automotive sheet metals: anisotropy, localization, damage and ductile fracture | Bailly, D.: Flexible Manufacturing Of Double-Curved Sheet Metal Panels For The Realization Of Self-Supporting Freeform Structures | Hildenbrand, P.: Flexible Rolling Of Process Adapted Semi-Finished Parts And Its Application In A Sheet-Bulk Metal Forming Process | |
10:30 - 10:55 | Di Michele, G.: Investigation on the strain behaviour of a precipitation-hardenable aluminium alloy through a temperature gradient based heat treatment | Michieletto, F.: Formability of AA6060 tubes in hot metal gas forming at high temperatures | Löffler, M.: Locally Adapted Tribological Conditions as A Method For Influencing The Material Flow In Sheet-Bulk Metal Forming Processes | |
10:55 - 11:30 | Coffee Break | |||
11:30 - 12:45 | Materials Testing | Forming | Sheet-Bulk Metal Forming | |
11:30 - 11:55 | Eller, T.: Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel | Haefner, T.: Friction adjustment within dry deep drawing by locally laser textured tool surfaces | Freiburg, D.: Influence of surface modifications on friction, using high-feed milling and wear resistant PVD-coating for sheet-metal forming tools | |
11:55 - 12:20 | Suttner, S.: Influence Of Stress Relaxation After Uniaxial Pre-Straining On Subsequent Plastic Yielding In The Uniaxial Tensile Test Of Sheet Metal | Wiens, E.: Internal Flow-Turning – An Innovative Technology For The Manufacture Of Tailored Tubes | Beyer, F.: Experimental and simulative investigations of tribology in SBMF | |
12:20 - 12:45 | Rosenschon, M.: Validation Of Kinematic Hardening Parameters From Different Stress States And Levels Of Plastic Strain With The Use Of The Cyclic Bending Test | Loh-Mousavi, M.: Laser Forming of Steel Dome-Shaped Parts Using a Flower Pattern | Loderer, A.: Measuring systems for sheet-bulk metal forming | |
12:45-14:00 LUNCH | ||||
Afternoon Session | 14:00 - 14:30 | Altan, T.: Use Of FE Simulation And Servo Press Capabilities In Forming Of AHSS And Aluminum Alloys | ||
14:30 - 14:40 | Change to Sessions | |||
14:40 - 16:45 | Modelling | Forming | Planning | |
14:40 - 15:05 | Buffa, G.: Design Of Numerical Simulations Of Linear Friction Welding Processes: Issues And Difficulties | Tulke, M.: Lightweight Design In Architecture – Forming Of Stainless Steel Composites For Modern Facades | Hussein, H. M.: Selection, Modeling And Prediction of Life of Stripper of Compound Die | |
15:05 - 15:30 | Haufe, A.: A Constitutive Model For The Simulation Of The Deformation Behavior Of TWIP Steels | Abdelkefi, A.: On The Friction Effect On The Characteristics Of Hydroformed Tube In A Square Section Die: Analytical, Numerical And Experimental Approaches | Kaiser, C.: New Diagnostic Techniques For An Automated Hemming Validation Of Hang-On Parts | |
15:30 - 15:55 | Tsoupis, I.: Numerical Prediction Of Failure Within Small Curvature Bending Of Advanced High Strength Steels | Leacock, A. G.: The Influence Of Strain Rate On The Springback Of Commercially Pure Titanium In A Stretch Forming Operation | Dewil, R.: Sheet Metal Laser Cutting Tool Path Generation: Dealing With Overlooked Problem Aspects | |
15:55 - 16:20 | Isik, K.: Enhancement Of Lemaitre Model To Predict Cracks At Low And Negative Triaxialities In Sheet Metal Forming | Frey, P.: Embossing Of Metal Inserts For Subsequent Assembly Injection Moulding Of Media Tight Electronic Systems | Mariano, E.: Minimization Of Energy Consumptions By Means Of An Intelligent Production Scheduling | |
16:20 - 16:45 | Dave, H.: Study of Earing Defect during Deep Drawing Process with Finite Element Simulation | |||
16:45 | End of Sessions | |||
19:00 DINNER |