- Joining
- New Approach for Versatile Self-Piercing Riveting: Joining System and Auxiliary Part
- Influence of the Rivet Coating on the Friction during Self-Piercing Riveting
- Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
- New Joining Concepts for Self-Pierce Riveting Friction Characterisation for a Tumbling Self-Piercing Riveting Process
- Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components
- Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks
- Temperature Dependent Modelling of Fibre-Reinforced Thermoplastic Organo-Sheet Material for Forming and Joining Process Simulations
- A Finite Plasticity Gradient-Damage Model for Sheet Metals during Forming and Clinching
- Effect of different tool geometries on the mechanical properties of Al-Al clinch joints
- Load Path Transmission in Joining Elements
- Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
- A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
- Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X
- A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints
- Approach for the automated analysis of geometrical clinch joint characteristics
- Forming
- Stretch Forming of Ti-6Al-4V Hybrid Parts at Elevated Temperatures
- Introducing Residual Stresses on Sheet Metals by Slide Hardening under Stress Superposition
- Assessment of Springback Behavior of 800 – 1200 Mpa Dual-Phase Steel Grades
- Functional Gradation in Precipitation Hardenable AA7075 Alloy by Differential Cooling Strategies
- Towards automatic part identification in sheet metal workshops
- Surface Treatment to Promote Joining of Glass Fiber Reinforced Plastic and AZ31 Magnesium Alloy for Fiber Metal Laminates via Hot Metal Pressing
- Effect of stretching on springback in rotary stretch bending of aluminium alloy profiles
- Investigation of the Influence of a Superimposed Oscillated Forming Process on Forming Characteristics
- Incremental Forming
- Development of Magnetic Field-Assisted Single-Point Incremental Forming
- Multistep Incremental Forming beyond 100°
- On the Effectiveness of SPIF Process to Re-Form End-Of-Life Components as Compared to Conventional Forming Approach
- Incremental Roller-Flanging of Thick Metal Sheets Geometry Compensation Methods for Increasing the Accuracy of the SPIF Process
- Bonding and Welding
- Influence of Roughness and Curing Temperature on the Strength of Aluminum Adhesively Bonded Joints
- Laser welding of Laser Powder Bed Fusion Manufactured Inconel 718: Microstructure and Mechanical Properties
- Laser Welding of Laser Powder Bed Fusion (LPBF) Manufactured 316L Stainless Steel Lap Joint
- Microstructural Evolution and Tensile Strength of Laser-Welded Butt Joints of Ultra-High Strength Steels: Low and High Alloy Steels
- Characterisation
- Investigation of the Micro Hardness at the Cut Surface of Fine Blanked Parts with Variation of Sheet Material and Cutting Temperature
- Material Model for the Production of Steel Fibers by Notch Rolling and Fulling
- The Frictional Force on the Slug in Shear Cutting
- Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength Steels
- Determination of the Biaxial Anisotropy Coefficient Using a Single Layer Sheet Metal Compression Test
- Microstructure and Formability of Laser Welded Dissimilar Butt Joints of Austenitic- Ferritic Stainless Steels
- Local Strain Measurement in Tensile Test for an Optimized Characterization of Packaging Steel for Finite Element Analysis
